Abrex Paint & Chemical Ltd.

Website Links

Description

11-Series Heat Resistant Coatings Abrex 11-Series Coating is a High Temperature, low gloss alkyd-silicone material recommended for use on cast aluminum, aluminized or cold rolled steel parts for Hi-Temperature service up to 1200 degrees F. This product line comes in baking enamels or air dry enamels depending on your application. Some custom colours are offered as well as metallic modifications to give that 3 dimensional look. Typically the non-volatile content for these products ranges from 22-27% by volume. Some proven areas of application include fireplaces, barbecues and stove pipes. back Abrex 14-Series coating is a high quality, fast drying, vinyl material recommended for use as a one coat system or a topcoat for steel, aluminum, concrete, glass and some plastics where exterior durability, chemical resistance and adhesion are critical. This product is excellent for electrostatic, airless and conventional spray. Some proven areas of application include fence posts. back 20-Series Water Reducible Baking Enamels Abrex 20-Series Baking Enamel is a fast curing, water reducible alkyd-amino material recommended for use on cold and hot rolled steel where good exterior durability is required. This product line can reduce your solvent emissions and has a proven record in farm implement and metal strapping applications. Easy cleanup with water is a distinct advantage here. see photo back 21-Series Water Reducible Air Dry Enamels Abrex 21-Series Coating is a high quality, fast drying water reducible alkyd material recommended for use as a one coat system or as a primer for steel, aluminum and plastic substrates where exterior durability, corrosion protection and adhesion are critical. Some proven areas of application include propane tanks and tunnel equipment. This product offers easy cleanup with water and reduced solvent emissions and odor back 22-Series Water Reducible Acrylic Latex Enamels Coatings for Plastic - Water-based "compliant" coatings are available for a variety of plastic substrates including polypropylene, PVC, Cellular PVC, Polycarbonate, Noryl and Polyethylene, as well as "mixed blend" reground materials. These coatings can be used as primers or as finished topcoats and are available in various colours. Coatings for Wood - Water-based coatings have been developed for wood substrates (Soft, Hard and combined types) that will air dry or can be force dried. These coatings provide a uniform finish and do not cause "grain raising". They are available as primers or finishing products in a variety of colours. Coatings for Foam - Water-based coatings are available for urethane products both as "Barrier" type or finished coatings. These products offer good flexibility and are suitable for both interior and exterior applications. They can be topcoated with a wide variety of water and solvent based house paints. Coatings for Masonite - Water-based coatings with good block resistance have been developed for Masonite that will air dry or can be forced dry. They can be applied at a variety of film thicknesses to meet different requirements. They can be topcoated with a variety of house paints.

Companies nearby